Sportster Weld on Hardtail 1982-2003 SP1600E
These weld directly to the backbone instead of plugging into the stock seat tubes, weld to the lower frame
rails, and have a plate that bolts to the back of your rear motor mount for simple installation and
alignment. Fits all Evo Sportster's and 1982-1985 Ironhead's. These are 100% tig welded in a jig by a
professional welder. Available in any stretch and axle height. Please specify desired stretch, desired ride
height, and your rear tire size. Desired ride height is the distance from the ground to the bottom of the
frame rail. These are made to order and will take approximately 4-6 weeks.

Specs:
1" diameter x .120" wall seat tubes and lower tubes
3/8" thick axle plates with a 3/4" axle slot
81/2" width between axle plates work's with your stock wheel, axle, and spacers
Includes stainless steel axle adjuster bolts and two axle spacers for the adjusters to push against

                                                                               Please contact us for pricing and availability

                                                                                                      
Copyright Elswick Cycles 2008-2014